Model Railway Forum banner

Roco new item E10.3

6323 Views 17 Replies 10 Participants Last post by  neil_s_wood

This new item has been announced by Roco. It is a starter set with the following features;

Digital starter set with E 10.3 electric locomotive and DB express train



For friends of the third epoch ("Epoche III") of the Deutsche Bundesbahn, this starter set offers a model E 10.3 locomotive with digital controls and additional digital functions. In addition to offering a wide range of sound functions, the digital controls can also be used to raise and lower the pantograph. The three express train cars, all in 1:87 scale, have doors which can be opened and closed using digital controls. This is accompanied by characteristic door noises.
Roco geoLINE track oval R3:
14 straights G200 (incl. 1 current connection element)
12 curves R3
Transformer 10725, 50 VA/3,2 A
Digital amplifier 10764, 50 VA/3,2 A
9999 locomotive addresses programmable
Initial voltage, acceleration, and deceleration can
be individually programmed (optionally with 14 or
28 speed steps)
Light separately controlled

It has the standard starter set stuff a DCC controller and track but what make sthis stand out is some of the digital features offered. The loco has raising and lowering of pantographs. Although this was previously offered by Maerklin and Trix it is still pretty rare. What it also has is opening and closing of coach doors accompanied by the correct sounds. Sounds good doesn't it? and all for the sum of 790 Euro's

More here.
See less See more
1 - 1 of 18 Posts
All HO stock will run on OO track as both scales use the same spacing between the rails despite HO being 3.5mm to the foot compared to ))'s 4mm to the foot. That is why the purists prefer HO to OO. The rest of us can live with the 12.5% error in track gauge

Back to the topic, as much as 'd love this set, I'll have to wait and see what other innovations ROCO release in the future as I don't have the funds for that right now!

See less See more
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.