[akos barcsik]

Hi ALL!

I 've built hungarian diesel locomotive MÁV M41 in gauge 1. This modell (the original one) is the most used diesel loco in hungarian second line rail. My modell controlled by RC and power supply came from LiFE battery (2300ma capacity) This battery enought to use more than 3 hours. Model has 4 pcs. 12v motor (each axel) Please see attached pictures

By

Ákos

VIDEO

Ákos

 

[andrew]

A splendid model indeed - thank you for posting it. Can you tell us more about the motor and drive, please? Is it a hollow shaft motor with epicyclic gearing?

andrew

 

[akos barcsik]

Thanks a lot!
I ve built these drive system and my plan was that to keeping everything inside the bogie's geometry. These construction allow some 'flexibility' that means axes (radsatz) can move separately (like a suspension) and of course you have more space inside the body! (for a accu or whatever..)
I could change the motor easily if need a different performance of it (12v or 24v).
Now im using a 12 v motor in my loco (operating voltage 10v-16v approx 8-10 wat at full load / each) but what you can see in the pictures is different one (24v for LGB or Piko higher voltage use)
The speed of the wheel (of the loco) on 12 volt approx. 110km/h (in 1/32 scale of course).
The gear ratio is built up one bevel gear (next the motor) and one spur gear on the train axle.

Best Regards

Ákos

 

[Mike Buckner]

Very nice to see. Thank you for posting.

Mike

 

[akos barcsik]

Thanks a lot!

This is another video with sound!

Akos

 

[Mallarddriver]

Hello Akos,

brilliant work

Kind regards
Soeren

 

[akos barcsik]

Hi all

I started to built a small series of M41 model. (4 pcs)
please see the pictures below

Ákos

 

[akos barcsik]

Some small progress.

 

[jim s-w]

Good stuff Akos

How many are you planning to make?

Jim

 

[akos barcsik]

Hi Jim

Thanks a lot!

Now im working on 4 pcs and originally i planed max 10 pcs to make but the end will be around 20 pcs as i see.

Ákos

 

[akos barcsik]

Akkubox is ready

 

[Jack P]

Wow.

Is really the only word I have..

 

[akos barcsik]

Thanks a lot!

Today in the Garden!

 

[akos barcsik]

http://www.youtube-nocookie.com/embed/http://youtu.be/-F4QIyfndZY?rel=0

 

[akos barcsik]

Little progress on the series

http://www.youtube-nocookie.com/embed/http://youtu.be/SHNQX5CsWxA?rel=0

 

[akos barcsik]

I Played a bit in my garden

Ákos

http://www.youtube-nocookie.com/embed/k75k1kZ1b88?rel=0

http://www.youtube-nocookie.com/embed/Fg5N-TyqMw8?rel=0

 

[akos barcsik]

Just like in the Ganz factory 40 years ago...

Ákos

 

[akos barcsik]

HI ALL!

Some progress... (if someone is interested)

AKOS

 

[dwb]

QUOTE (if someone is interested)
I am always interested in modelling of this standard

Thanks for sharing it with us.

David

 

[sean hpw]

Beautiful work!

May I ask what scale/gauge it is please?

Sean