Model Railway Forum banner
1 - 1 of 10 Posts

· No Longer Active.
13,704 Posts
QUOTE (neil_s_wood @ 6 Oct 2006, 01:53) <{POST_SNAPBACK}>Only the Bachmann DCC controller does this to the best of my knowledge. No other system allows this.

Hi Neil,

Quite a few do actually - the Fleischmann Twin-Centre/Uhelbrook Intellebox & Lenz 100/90 are 2 that I know of, however, the motor on the analogue motor usually "buzzes" & runs hot - it will almost certainly burn out if left energised on DCC track.

Personally, I would not recommend running an anologue loco on DCC track, even if some makes allow that facility.

Most exhibitions have a mixture of layouts DC/DCC so it should not be a problem. One trader I know has a DC/DCC test demo track on his stand & also tests for other traders.

best regards
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.