Model Railway Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
201 Posts
Discussion Starter · #1 ·
Has anybody managed to fit a sound decoder in to the Bachmann Class 20 with the express models lighting kit.

I have been working on it for a few days and just have not got anywhere. I have put a 20mm x 40mm speaker in it.

please help me i am at my wits end.

Alistair
 

·
Registered
Joined
·
461 Posts
Alistair is it a new chassis class 20 or old chassis class 20 ?

As you will need to cut a section out of the chassis if it is an old type one as the new type already has a space for a speaker.
Then fitting the light unit is the easy bit.

The new sound class 20 will take the body from the two previous versions of class 20 so that gives you another option as well, (swap the bodys over then fit your lights) the rest is up to you Alistair let me know if I can help?

Pete
 

·
Registered
Joined
·
201 Posts
Discussion Starter · #3 ·
I have already connected it all together in to the body it is an older chassis type the railfreight red stripe body 20132. to one with space for the speaker.

The problem is that the body is sitting about 3 mm too high so when i try to screw it down it just pulls the floor away from the cab.

Alistair
 
1 - 4 of 4 Posts
Top