Model Railway Forum banner
1 - 1 of 11 Posts

· No Longer Active.
13,704 Posts
AFAIK the Roco system is very stable. The locomotive bulbs will look much brighter than on 12v DC as they are getting full voltage all the time. If you cannot "dim" the lights with the decoder CV settings then you could replace the bulbs with 24v ones.
The other possibility would be to replace the power transformer with, say a 12v one.

Don't forget that you can use the Mulimaus as a second controller with most systems when you upgrade.

Hope this helps.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.