Model Railway Forum banner

Tortoise Point Motors

4005 Views 15 Replies 12 Participants Last post by  beast66606
Has anybody heard abt or even used this so called point motors.

1 - 3 of 16 Posts
I have looked at the Tortoise motors. I found them a little expensive. Especially if you add the Rabbit DCC controller.

The Tillig slow action motors are cheaper and do the same thing. And they don't hum.

Look here and here (on my blog)

I've promised a member here already to do a photo-review of the installation of these Tillig motors. I'll do it in the next week or two.
That is one very impressive yard. Its the perfect sort of yard to use with computer control.

What are the spacers in the track - like the one just in front (on the next track) of the loco with lights on?
QUOTE (rainprooftractor @ 17 Aug 2007, 16:55) <{POST_SNAPBACK}>...but I only have 45mm clearance underneath my layout (it sits on the floor on its "metric 2 x 1" frame) ...

See here:
1 - 3 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.