Model Railway Forum banner
1 - 1 of 1 Posts

No Longer Active.
13,319 Posts
Many, many years ago I had one of these setups & do remember the pressure switches being a pain to set uo, but once adjusted the system did work (& you could using 3 or more units set a fully operating block system).

You could try the Hornby Service Dept' - they are usually very helpul.

If you get really stuck & refresh my memory with the connections of the relay thingy I'll work out the diagram from afresh.

Unless you have good reason to use the Triang unit then KPC & Gaugemaster (to name a couple) do some very nice non-DCC block units with smooth acelleration/deceleration.

Hope this helps.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.