Model Railway Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
2,873 Posts
Fpr my new garage layout I have bought 10m of mains cable with 2.5mm2 thick wires for £8.98 from B&Q. As suggested on someone's blog, I shall strip off the outer grey plastic and use the red and black inside wires for the bus, set about 3" apart. The bare copper earth wire from the reel I will use to make the droppers. They should not need any covering as they will be short and well apart but I will put on some sleeving if necessary.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top