Model Railway Forum banner

Which is best decoder for tortoise points?

9366 Views 10 Replies 9 Participants Last post by  Richard Johnson
I want to use tortoise motors on a DCC O gauge layout I'm building. My question is which decoder I would be best to use with them. 9 points in total working with Gaugemaster Prodigy controller. The Lens LS 150 needs AC power, so I think that's ruled out. Other options seem to be SMD82 or DAC 10 or digitrax DS 44, a very basic one.

Anyone any experience with the combinations of any of the above?

1 - 1 of 11 Posts
QUOTE (Flashbang @ 5 Sep 2008, 15:35) <{POST_SNAPBACK}>Hi
That's a good price if you're US side of the pond or somewhere that doesn't impose import duty and a service charge too.
But for UK buyers that's around £97.00 plus shipping costs plus import duty. Roughly around £120-£130ish mark. Which is about the same price as available in the UK e.g. A single unit is £12.65 from DCC Supplies, possibly cheaper of 12??

There are cheaper sources in the UK!


John R
Bromsgrove Models
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.