Model Railway Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
642 Posts
Discussion Starter · #1 ·
Hi there I know I have been at this stage before and I needed some help there I was wondering if someone could give me some more please with the wiring of the layout now it has been modified from what it was.

I have uploaded albeit a very crude drawing of what the layout will look like. if someone could help me by showing where the power feeds and isolating joiners should go on the layout to give it a belt and braces look I would be greatfull.

http://www.modelrailforum.com/forums/uploa...71_60_95856.jpg
 

·
Registered
Joined
·
4 Posts
QUOTE (harkins77 @ 2 May 2008, 17:46) <{POST_SNAPBACK}>Hi there I know I have been at this stage before and I needed some help there I was wondering if someone could give me some more please with the wiring of the layout now it has been modified from what it was.

I have uploaded albeit a very crude drawing of what the layout will look like. if someone could help me by showing where the power feeds and isolating joiners should go on the layout to give it a belt and braces look I would be greatfull.

http://www.modelrailforum.com/forums/uploa...71_60_95856.jpg
NEED MORE DETAIL, HAVE YOU INSTALLED THE POWER BUS? WHO'S TRACK ARE YOU USING? WHAT TYPE ARE THE POINTS?IE LIVE OR DEAD FROGS. WHERE IS YOUR PROGRAM TRACK? LEN.
 

·
Registered
Joined
·
189 Posts
Look at the forum topic (new postings) on

'help with control and isolation'

and this is full of quite good advice and some of the main topics such as planning the layout, where to feed power, how to isolate etc and also contains links to layout nideas, construction techniques.

In short, it is a good spot for your request.

Ah I love my anorak

Basil

 

·
Registered
Joined
·
642 Posts
Discussion Starter · #4 ·
There was a previous post where someone helped me with the last layout wiring plan but I cannot find it and I was wondering if the same person could help again.

The track I am using is Kato track in N gauge and I am not using a bus power system and the programming track is the maintrack at the moment as I am using a dynamis and the pro unit ain't out yet so that I can have the programming track seperate.

Thanks for the tip basil I hadn't read that thread.
 
1 - 4 of 4 Posts
Top