[Peter_Harvey]

Hi Chris

If have looked at my Blog or posts for my new layout you will see that I have a three way point on it all my track is peco code 100 after reading all the threads on here I decided to go with insilfrog points for the lot mainly cause of the problems that you have described and I have had no problems at all with it it works a treat.

I hope you find this useful?

Pete

http://www.modelrailforum.com/forums/blog/...p?showentry=165

 

[Peter_Harvey]

Chris

I have not used any insulated rail joiners in fact all of the joints are soldered and the two wire power feeds on both sides of the points to give the best power feeds all of the points and track are straight out of the box.

Pete