Model Railway Forum banner

Xtrckcad Assistance

1395 Views 9 Replies 4 Participants Last post by  coldcarpaccio
QUOTE have a couple of questions about XtrkCad if someone knows ??

When you have designed the final layout, can you print everything 1:1 scale so you have a life size plan..

Also, is there anywayto change the distance between parallel running lines, as they are a little far apart as standard...

Yes you can print everything 1:1 under the print options

Distance between parallel lines:
Click on the parallel lines option at the bottom separation distance is flagged up, change this to what ever you want, check this on a pair of turnouts on high magnification, to set correctly. If all else fails try the help file.

anything else you need to know about Xtckcad ? please post under this heading
See less See more
1 - 2 of 10 Posts
I've received another query in this regard
download the program and on the site search for the registration key cut and paste this into your program to get clearance to level two, this is unrestricted use.
Any further questions please post under this heading I'll try to sort out you questions.
See less See more
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.