Model Railway Forum banner

Xtrckcad Assistance

1395 Views 9 Replies 4 Participants Last post by  coldcarpaccio
QUOTE have a couple of questions about XtrkCad if someone knows ??

When you have designed the final layout, can you print everything 1:1 scale so you have a life size plan..

Also, is there anywayto change the distance between parallel running lines, as they are a little far apart as standard...

Yes you can print everything 1:1 under the print options

Distance between parallel lines:
Click on the parallel lines option at the bottom separation distance is flagged up, change this to what ever you want, check this on a pair of turnouts on high magnification, to set correctly. If all else fails try the help file.

anything else you need to know about Xtckcad ? please post under this heading
See less See more
4
1 - 1 of 10 Posts
Name: Open Registration
Key: 248890010702

Found on this website
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top